生产标准：GB/T7984-2001, DIN22102, BS490, AS1332, RMA, JISK6322, SABS1173GB/T7984-2001，DIN22102，BS490，AS1332，德国DIN，JISK6322，SABS1173等

types: 类型： Besides General EP Belt, there are Fire-retardant type, Cold-resistant type, Wear-resistant type, Heat-resistant type, Acid and alkaline resistant type, Oil-resistant type, Antistatic electricity type, High-grade type and etc.除了一般的EP输送带带，有阻燃输送带，耐寒输送带，耐磨输送带，耐热输送带，耐酸碱输送带，耐酸碱输送带，耐油输送带，抗静电输送带，高档输送带等。

型号：Ep80 Ep100 Ep125 Ep200 Ep250 Ep300 Ep400 Ep500 Ep600 ep80 EP100 Ep125 EP200 Ep250 EP300 EP400 EP500 EP600

The physical and mechanical properties of nylon conveyer belt and EP conveyer belt are as following: 尼龙输送带和EP输送带的物理机械性能如下：

1．    The physical and mechanical properties of coverffig layer: please refer to the physical and mechanical properties of the common conveyer belt.的coverffig层的物理机械性能：请参阅普通输送带的物理机械性能。
2. 2。 Tensile property of through thickness:通过厚度拉伸性能、纵向拉伸强度不低于以下标称值：aThe longitudinal tensile strength is not lower than the following nominal val315 400 500 600 630 8OO 9OO 1000N/315 400 500 600 630 8OO 9OO 1000N/mm
b. 3。 The through thickness elongation rate of the belt should not less than rate of trough thickness of the belt should no more than 4%.通过厚度的皮带伸长率应不小于槽带的厚度率应不超过4％。
c. 4。 Straightness: no more than 25mm.直线度：不超过25mm。

5. 5.柱塞粘合强度.

标准覆盖胶级别(COVER GRADES AS PER DIN ST)：